Category Power Supplies
Analog, digital, buck-boost
-
CE020 - Standard Mode PWM using dsPIC SMPS DSC by Microchip Technology This code example illustrates the use of the Power Supply PWM module in the Standard PWM mode. This example is intended to provide a setup guide for using this mode.
- CE170 - Center-Aligned PWM by Microchip Technology
This program sets up the PWM module for center aligned mode operation. The PWM1 outputs are configured to produce a 400kHz PWM signal with independent duty cycle. PWM1H produces 50% duty cycle and PWM1L produces 25% duty cycle. PWM2 outputs are configured...
- CE169 - PWM Capture Function by Microchip Technology
The dsPIC SMPS Family of Digital Signal Controllers feature an on-chip Power Supply PWM Module. This module supports several PWM modes typically used in Power Conversion applications. One of the simplest modes is the Standard PWM Mode.
- CE168 - Current Reset/Variable frequency mode by Microchip Technology
The dsPIC SMPS Family of Digital Signal Controllers feature an on-chip Power Supply PWM Module. This module supports several PWM modes typically used in Power Conversion applications. One of the modes is the External Period Reset Mode.
- CE166 - Dual Trigger ADC by Microchip Technology
In this code example, the ADC on the dsPIC33FJ16GS502 is triggered twice in every PWM cycle (~4.4mS). The 1st trigger is at the start of PWM cycle, while the 2nd is at the middle.